Back to the list

Bonnet

  • 1
  • 2
  • 3
  • 4
  • 5

Bonnet

To open, pull the handle 1 located on the left-hand side of the dashboard.

Unlocking the bonnet catch

Push the tab 3 towards the left as you open the bonnet.
WARNING
Ensure that the bonnet is properly locked.
Check that nothing is preventing the catch from locking (gravel, cloth, etc.).

Opening the bonnet

Lift the bonnet, guiding it up. It is held in position by struts.

Closing the bonnet

To close the bonnet again, hold the bonnet in the middle and guide it until it is in the closed position (movementB). Apply pressure to the bonnet at 2 until it locks.
WARNING
Do not lean on the bonnet: there is a risk that the bonnet may accidentally close.
WARNING
Vehicles not fitted with storage compartment A
Due to the presence of mechanical components:
  • it is forbidden to store objects under the bonnet;
  • when working on the engine compartment, ensure that you do not leave anything (cloths, tools, etc.) Otherwise, this may lead to the mechanical components being damaged or cause a fire.
Risk of damage or fire;
  • When working in the engine compartment, the mechanical components may be hot. The engine cooling fan may also start at any moment.
Risk of injury.
WARNING
Before carrying out any work under the bonnet, the ignition must be switched off (please see "Starting, stopping the engine" in Section 2).