Back to the list

VEHICLE SETTINGS CUSTOMISATION MENU

  • 1
  • 2
  • 3
  • 4
  • 5

On equipped vehicles, this function, which is integrated in trip computer 1, allows you to activate/deactivate and adjust some of the vehicle’s functions.

Accessing the vehicle settings personalisation menu

With the vehicle stationary, press several times on button 3 or 4 until the settings menu is displayed. Press and hold button 2 to enter the menu.

Adjusting the settings

Use button 2 to browse and select the function to modify.

Depending on the vehicle, the following functions are available:

- automatic locking of the doors while driving;

- activation of the rear parking distance control;

- activation of the front parking distance control;

- automatic activation of night mode;

- clock;

- selecting a language;

- choice of units: km/h or mph.

The settings personalisation menu cannot be used when driving. Over 2 mph (4 km/h), the on-board display automatically switches back to trip computer mode and the “Settings menu: vehicle stopped” message appears.

= function activated

< function deactivated

Once a line has been selected, keep pressing either button 2 or 3 to change the function:

For options “Unit:” or “Language”, you will have to make a further selection. In this case, make your selection by navigating with button 3 or 4 and confirm by holding button 2.

To exit the menu, select “EXIT” using button 3 then confirm by briefly pressing button 2.