Back to the list

My Safety

  • 1
  • 2
  • 3
  • 4
  • 5

My Safety

Introduction

The "My Safety" function can be used to deactivate or activate a set of driver assistance functions simultaneously.
Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen by selecting the driving aid functions to be switched off as a group.

Operation

"ALL ON" mode

Depending on the vehicle, the functions and configurations of driving assistance concerned are:
When "ALL ON" mode is activated, the "My Safety All ON selected" message is displayed on the instrument panel to confirm this. The driving aids that are available in the mode are activated.

"Custom" mode

From this mode you can deactivate or reactivate certain driving aids that are available in the "ALL ON" mode previously configured using the "My Safety Custom" setting.
With the ignition on, press button 1 twice in succession to activate "Perso" mode. The first time you press it, the "Press again for My Safety Perso" message is displayed on the instrument panel. On the second press, the indicator light on the button 1 goes out. "Perso" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.
To switch back to "ALL ON" mode, press button 1 once. The indicator light on button 1 lights up.
Tip
Depending on the vehicle and on the length of time since the last time the engine was stopped, the "ALL ON" mode is reactivated:
  • when the vehicle is unlocked;
or
  • when a door is opened;
or
  • when the engine is restarted.

Configuring "My Safety Custom"

WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
Tip
The "My Safety Custom" settings saved for the "Custom" mode are stored when the engine is last stopped or when the doors are locked.

Configuration from the multimedia screen 2

Please refer to the multimedia instructions for more information.

MY SAFETY